TANNOY PRECISION 6.4 PREMIUM FLOORSTANDING SPEAKER

TANNOY

$5,999.00

Recommended amplifier power (Watts RMS)     20 – 200
Continuous power handling
(Watts Peak RMS)     100
Peak power handling (Watts)     400
Sensitivity (2.83 Volts @ 1m)     90 dB
Nominal Impedance (Ohms)     8
Frequency response (-6dB)     29 Hz – 35 kHz
Dispersion (degrees conical)     90

DRIVE UNITS     
Dual Concentric™ high frequency     25 mm (1”) Titanium dome with Tulip WaveGuide
Dual Concentric™ low frequency     150 mm (6”) treated paper pulp cone with rubber surround. 44 mm (1.75”) edge-wound voice coil
Bass Driver     150 mm (6”) treated paper pulp cone with rubber surround. 44 mm (1.75”) edge-wound voice coil
Auxiliary bass radiator     2 x 150 mm (6”) treated paper pulp cone with rubber surround, mass loaded

CROSSOVER     
Crossover Frequency     170 Hz, 1.6 kHz
Crossover Type     Passive low loss 2nd order LF, 1st order HF

CABINET     
Enclosure type     Passive radiator
Dimensions (excl grille) H x W x D 1052 x 310 x 352 mm
Volume - litres (cubic feet)     44.1 Litres (1.56 cu. ft.)
Weight     21.8 kg (48.1 lbs)

Drawing on Tannoy’s rich heritage in fine loudspeaker craftsmanship, Precision cabinets mate traditional acoustic engineering with contemporary style and design. Flat front and rear baffles coupled with curved side panels reduce internal reflections and brace the cabinet structure. This geometry minimises cabinet colouration, improving the clarity and communication of the music.

Audiophile crossover
Low-loss laminated core inductors and audiophile-grade polypropylene capacitors are used exclusively throughout the Precision crossover. Components are hard wired onto a rigid mounting board rather than using a typical Printed Circuit Board (PCB). The result is an exceptionally clean signal path and very low crossover losses, ensuring the very best in detail resolution and musical communication.
Precious metal wiring
Silver-plated, high purity oxygen free copper wiring is used throughout the Precision range. This high-end cable construction offers low-loss, high-current signal transfer to ensure every musical nuance is reproduced. Silver-plated cabling is noted for its pure HF reproduction further enhancing the Precision range’s musical communication.
High end connections
The Precision terminal block features high quality gold-plated bi-wire binding posts for a secure connection to heavy-gauge bare cable, spade or banana plug terminations. Tannoy’s signature fifth terminal is incorporated across the Precision range to earth the driver chassis to the amplifier ground and reduce RF interference in the audio system. Each Precision loudspeaker is supplied with high purity copper bridging links with gold-plated terminals for single-wire installations.
Mass Loading Cavity (MLC)
A Mass Loading Cavity (MLC) has been engineered into the cabinets of the flagship floor-standing Precision models. The MLC offers user-specified bass tuning by filling or part filling the sealed cavity with dry mineral aggregates or dedicated loudspeaker ballast materials. Depending on room acoustics and flooring construction loading the MLC can improve low frequency timing information and enhance stereo imaging.
Dedicated plinths
Precision floor-standing models are supplied with custom plinths designed to stabilise the loudspeaker and improve ground coupling. Each plinth incorporates Tannoy’s easy-to-adjust floor spikes. Each metal bodied turret is mounted through the plinth, allowing the spike height to be adjusted from above. A large CNC machined thumb wheel locks the spike in place for maximum rigidity. Dedicated spike cups are supplied to protect polished or marble floors.